Garage Door Keypad
The keypad is the outdoor number pad mounted by the door frame that opens the door with a code. It is the one opener component permanently exposed to Florida sun, rain and salt air, and it is the one that ages fastest. Most failures are the battery, worn buttons, or lost programming. Repair or replacement runs $95 to $300 installed.
Covered by Garage Door Opener Repair · from $95
A keypad is a battery powered transmitter, exactly like a remote but bolted to the outside of your house. It pairs to the same receiver in the opener head and sends the same kind of rolling code.
Which means it inherits every weakness of the remote and adds weather. Direct sun destroys the plastic and the printing on the buttons, rain finds its way past the seal, and salt air corrodes the contacts underneath. A keypad in a west facing wall in Florida has a hard life.
The pattern most people notice first is that certain digits stop responding while others still work. That is the contact under that button, not the whole unit failing, though on a weathered keypad it is usually the beginning of the end.
How to tell this part has failed
- Some buttons work and others do not respond
- The numbers have faded off the buttons entirely
- No light or beep when you press a key
- The code is accepted but the door does not move
- It works intermittently, often worse after rain
- It stopped after a power cut or an opener reset
Why it fails in Florida
Battery first, always. Heat shortens battery life and a keypad in Florida sun runs hot every afternoon.
Ultraviolet damage to the keypad face. The printing goes first, then the plastic goes brittle and cracks, and once it cracks water gets in.
Moisture and salt on the contacts under the buttons, which is why individual digits go before the unit does, and why the fault is often worse right after rain.
Lost pairing after a power interruption or after the opener was reset for some other reason.
Can you do this yourself
Yes, this one you can do
Change the battery first, and check the seal and gasket while it is open, because a keypad that has been letting water in will keep eating batteries. If it still does not respond, try re-pairing it to the opener the same way you would a remote. If individual buttons are dead or the face is cracked, the unit has reached the end and replacing it is straightforward, though a new one has to be compatible with your opener brand and its code era.
Starting prices for a standard single door. Your final price depends on the door, the model, the wind rating a replacement needs and what we find. You get a written quote before any work starts.
Have a technician bring this part
Leave your details and we call you back to confirm the part, the price and a time. The technician arrives with it on the truck.
Garage Door Keypad
Not sold separately. Price shown is fitted, by a technician who brings the part.
(561) 897-9930Frequently Asked Questions
How do I change the keypad code?
The method varies by brand, and on most units it means entering the existing code, pressing a program or enter key, then entering the new one. Worth doing if you have given the code to a contractor, a cleaner or a former tenant. If you have lost the existing code, most keypads can be reset back to the opener from scratch by re-pairing at the Learn button.
Only some of the buttons work. Is that fixable?
Usually it is time for a new unit. Dead individual buttons mean corroded contacts under the membrane, and on a keypad that has spent years in Florida weather the ones still working are on the same path. Replacing the keypad costs less than a second visit for the next button.
Can I fit any keypad?
No, it has to match your opener. Compatibility depends on the brand and on the rolling code generation, so a keypad meant for a recent unit will not pair with a nineties opener and the reverse is also true. Tell us the brand and roughly the age of the opener and we will bring one that pairs.
